arduio » arduio-genom3

Changes¶

• Only accept connecting to arduio>=1.2, at 1Mbps (previous versions were at 2Mbps).
• Increase input/output and port vector sizes to 64 I/Os. Arduino Mega 2560 has 54 of them.

Download¶

arduio-genom3-1.3.tar.gz

Changes¶

• Drop "baudrate" parameter from the connect() service.
• Check ftdi latency and change it to 1ms if needed.
• Report meaningful error when set_dir() is called in a disconnected state.
• Initialize ios port during startup.
• Document all the services, ports and tasks.

Download¶

arduio-genom3-1.2.tar.gz

Changes¶

• Support arduio-1.1 (new 31Hz and 122Hz PWM frequencies and WS28XX leds)

Download¶

arduio-genom3-1.1.tar.gz

GenoM3 component connecting to an Arduino board running 'arduio'.

Download¶

arduio-genom3-1.0.tar.gz